Important - After the carpet has been evaluated to determine the fiber, general condition and best cleaning solution for soil removal, Quick Dry will proceed to restore you carpet or furnishing To a New Like Condition.

1. Heavy Duty Vacuuming to remove deeply embedded soil and surface soil, which removes locked in particles and deep down soil.

2. A pre-spray cleaning solution is prepared for your particular type of fiber. The remaining soil will be penetrated and held in suspension for removal.

3. Pre-spotting of all spots is done prior and after cleaning depending on your cleaning requirements. Unfortunately some spots/stains if present on the carpet for a long period of time may have become a permanent part of the fiber. Almost every spot/stain can be removed using today's technology.

4. While the carpet cleaning solution is working, all edges are vacuumed to remove accumulates loose soil and dust If soil filtration are present along the edges a cleaner designed for maximum effect will be used. Soil filtration can be located at a doors edge, the back edges of steps and along walls.

5. Using a truck mounted cleaning system and with a rinse aide, the hot water extraction process is used to rinse and clean the suspended soil from your carpet fibers. Using overlapping cleaning strokes and repetition dry strokes the soil and any impurities are being removed to the truck. This leaves the carpet fibers clean and a healthier atmosphere.

6. Post spotting follows to ensure our best efforts have been performed to ensure difficult spots are removed or lessoned.

7. An Optional Teflon © Carpet fiber protector can be applied to the finished fibers to provide protection, making normal vacuuming easier, help in removing any spills and to return your carpet to it's almost original condition.

* The responsibility of the customer is to wait until the carpet is dry before returning any furniture. Do not put young children on a wet or damp carpet and furniture. Vacuum at least once per week and more often if needed.